The building takes care of itself
A local AI reads every building system around the clock, from HVAC to meters to cameras, weighs the trade-offs against your energy, safety and operations targets and drives the systems you already run. The team keeps control the whole way.
100% local Works offline Full audit trail Keeps your BMS
Smart Building AI is a local decision layer that sits on top of the existing BMS, HVAC, PLC and sensors. It solves the same three problems in every building, energy cost, safety and daily operations, and coordinates the systems you already run toward business KPIs. It runs entirely on your own on-site hardware with no cloud, keeps working when the power or internet drops, and adds a layer of intelligence instead of replacing what is installed.
Three problems, in every building
Every commercial building fights the same three battles. Energy cost, safety, and daily operations. The BMS runs the climate, separate systems watch for incidents, and a team handles maintenance by hand. Each system optimizes its own corner. Nobody coordinates all of them toward the KPIs that move the business.
Energy cost runs on autopilot
Heating, cooling, lighting and peak load follow fixed schedules that cannot react to occupancy, weather or volatile grid prices in time.
Incidents surface too late
Safety and security events are caught minutes after they start, alarms drown in false positives, and the audit trail is pieced together after the fact.
Facility work stays manual
Technicians react to tickets and complaints instead of catching faults early, and manual rounds do not scale across large or multi site portfolios.
Observe, plan and act, on your own hardware
The agent reads every connected system continuously, weighs the trade-offs against your energy, safety and operations targets and drives the actuators that are already installed. It plans ahead instead of only reacting, and it explains and logs every move.
- 1
Look ahead
A cold front is coming, the grid price spikes at 6pm and the east wing empties at 5. The agent pre-conditions early on cheap power, trims peak load before the spike and eases back heating where nobody is.
- 2
Balance every KPI at once
It lowers energy cost, holds safety and comfort, and cuts manual work at the same time, not one target after another, all inside the guardrails the operator sets.
- 3
Explain and stay in control
Ask why it shed load or triggered an alarm and it answers in plain language. Every decision is logged and auditable, and the team can override any action at any time.
On-Device AgentTemperature, humidity and air qualityOptimize the KPIs that move the P&L
Nobody buys a smart building. Operators buy a KPI that improves. The agent optimizes energy cost, safety response and operating cost at once. The ranges below come from independent studies for this technology category.
One layer over your whole building
Energy optimization
It cuts energy cost autonomously, lowering peak load, grid draw and heating and cooling cost while lifting self-consumption of on-site solar. Lower cost, lower CO2, better ESG numbers, without touching comfort.
Safety and compliance
It detects incidents before they become emergencies and cuts response from minutes to seconds. Fewer near misses, fewer break-ins, fewer false alarms and faster evacuation, with every event on record.
Facility operations
The building takes care of itself. Faults get caught early, tickets get auto-resolved, technician hours and service cost drop and occupant complaints fall.
Full audit trail and registry
Every decision is logged and traceable, every device and sub-agent lives in an agent registry, and the fleet view shows all sites at once. The record buyers and auditors need is there by default.
Sees and connects everything
On-device cameras and vision, microphones, and industrial buses like Modbus and OPC-UA let it read the whole building, and robotics and actuators let it act, all on-site with images that never leave.
Fleet across the portfolio
One building learns a better strategy and the fleet rolls it out to the rest over the air, from one place, so an operator or OEM runs a whole portfolio as one.
What could the ranges mean here
Enter an annual building energy spend and see the saving range independent studies report for this category. The real figure gets measured in a pilot, never guessed.
Typical benchmark range
10-31%
Estimated annual saving
€50,000 - €155,000/ year
Range based on an independent NREL study of smart building automation, reported via 75F. Results depend on the baseline and get validated in a pilot, not promised.
Your data never leaves the building
The agent runs entirely on the operator's own on-site hardware. No cloud, no data leaving the building, and it keeps optimizing when the power or internet drops. Every action is logged and auditable, which matters when the building answers to owners, tenants and regulators.
- Runs on your own on-site hardware
- No cloud dependency, data never leaves the building
- Keeps operating through power and internet outages
- Works with the existing BMS, HVAC and PLC
- Full audit trail of every decision, registry and logging
- Designed for EU Cyber Resilience Act readiness
Questions building operators ask
Do we have to replace our BMS?
No. The agent adds a decision layer on top of the existing BMS, HVAC, PLC and sensors. It coordinates what is already installed toward energy, safety and operations goals, and full manual control stays with the team.
Does it run without internet?
Yes. Everything runs locally on your own on-site hardware, so the agent keeps optimizing during power and internet outages and no building data ever leaves the site.
How much can we actually save on energy?
An independent NREL study of smart building automation reports up to about 31% building energy savings, with HVAC up to about 42%. We do not promise a fixed number. The real figure gets measured in a pilot on your baseline.
Can it improve safety and response time?
Yes. It detects incidents early and cuts response from minutes to seconds, with fewer false alarms and a full audit trail of every event. Safety has no clean independent percentage, so we frame it qualitatively and never invent one.
Is there an audit trail for compliance?
Yes. Every decision is logged and traceable, every device and sub-agent sits in an agent registry, and the platform is designed for EU Cyber Resilience Act readiness with local execution and signed images.
Can it manage a whole portfolio of buildings?
Yes. A fleet view compares buildings and sites, finds the strategy with the best KPIs and rolls it out over the air from one place, which suits both multi site operators and OEMs.
A building that runs itself, with the operator in control
Start a pilot in one building, measure the real energy, safety and operations numbers on your own baseline, and keep the team and the full audit trail in control the whole way.
Explore more
Cut energy cost, peak load and grid draw with predictive, price-aware building control.
Building safety and complianceDetect incidents early and cut response from minutes to seconds, with a full audit trail.
Facility operations AILet the building take care of itself, from early fault detection to auto-resolved tickets.
Sources and notes
- 1Energy: an independent NREL study, reported via 75F, found up to about 31% building energy savings from smart building automation, with HVAC savings up to about 42%. Results depend on the baseline and get validated in a pilot, not promised.
- 2Operations: Deloitte reports 10 to 20% higher asset availability and 5 to 10% lower maintenance cost from predictive maintenance, and McKinsey reports up to 50% less unplanned downtime and 20 to 40% longer machine life. Always up to, and validated in a pilot.
- 3ROI: a commissioned Forrester Total Economic Impact analysis, via JCI OpenBlue, found up to about 155% ROI over three years. Commissioned study, results depend on the setup and get validated in a pilot. Safety has no clean independent percentage, so we frame it qualitatively as minutes to seconds response with fewer false alarms and a full audit trail.