Hardware Guide
The STM32L4 is an excellent match for fall detection with Edge Impulse. 128 KB SRAM delivers 2.0x the 64 KB minimum while 80 MHz processes 20 KB models in real time. DSP extensions and single-precision FPU accelerate inference.
| Spec | STM32L4 |
|---|---|
| Processor | ARM Cortex-M4F @ 80 MHz |
| SRAM | 128 KB |
| Flash | 1 MB |
| Key Features | Ultra-low-power (< 100 nA shutdown), Single-precision FPU, DSP instructions, AES hardware acceleration |
| Connectivity | USB OTG FS |
| Price Range | $4 - $12 (chip), $15 - $50 (dev board) |
The STM32L4's 128 KB SRAM delivers 2.0x the 64 KB minimum needed for fall detection. The 20 KB quantized model fits in the tensor arena with enough remaining capacity for input buffers and core application logic. More demanding features (multi-sensor fusion, large protocol stacks) may require careful allocation planning. For firmware and model storage, the 1 MB flash comfortably houses the Edge Impulse runtime, the 20 KB model binary, application firmware, and basic configuration data. Flash usage is well within budget for this configuration. The STM32L4 series targets ultra-low-power applications with shutdown current below 50 nA. For ML workloads, this means duty-cycled inference: wake from stop mode, sample sensor, run inference, report result, return to sleep. Battery life measured in years, not months. For fall detection, connect an IMU sensor (e.g., MPU6050 or LSM6DS3 via I2C/SPI) via SPI to the STM32L4. Sample at 50-200 Hz and collect windows of 64-256 samples as model input. The DSP extensions efficiently compute FFT features from raw sensor data. Edge Impulse provides an end-to-end workflow: data collection from the STM32L4 via serial or WiFi, cloud-based training with auto-quantization, and deployment via C++ library export or Arduino library. The platform estimates on-device RAM and flash usage before deployment, reducing trial-and-error. Use the serial data forwarder for data collection from the board. At $4-12 per chip ($15-50 for dev boards), the STM32L4 offers strong value for fall detection deployments. 22 PlatformIO-listed boards provide decent hardware selection. Key STM32L4 features for this workload: Ultra-low-power (< 100 nA shutdown), Single-precision FPU, DSP instructions, AES hardware acceleration.
Create Edge Impulse project for STM32L4
Sign up at edgeimpulse.com and create a new project for fall detection. Install the Edge Impulse CLI (npm install -g edge-impulse-cli). Use the data forwarder to stream imu data from your STMicroelectronics development board.
Collect imu training data
Connect an IMU sensor (e.g., MPU6050 or LSM6DS3 via I2C/SPI) to the STM32L4 via I2C. Use Edge Impulse's data forwarder or direct board connection to stream samples to the cloud. Collect 500+ labeled samples across all classes. Include normal operating conditions and edge cases in your dataset.
Train model in Edge Impulse Studio
Design an impulse with the appropriate signal processing block (spectral analysis for motion). Add a LSTM or 1D-CNN on IMU time-series learning block. Train and evaluate — Edge Impulse shows estimated latency and memory usage for the STM32L4. Target under 16 KB model size and under 40 KB peak RAM.
Deploy and validate on STM32L4
Deploy via Edge Impulse CLI (edge-impulse-cli export) or download the C++ library. Allocate a tensor arena of 30-50 KB in a static buffer. Run inference on live imu data and compare predictions against your test set. Log results to serial for desktop validation. Measure inference latency and peak RAM usage to verify they meet application requirements.
Espressif xtensa-lx7 at 240 MHz with 512 KB SRAM. $3-8 per chip. Compared to STM32L4: more RAM, faster clock, cheaper. Excellent rated.
Nordic Semiconductor cortex-m4f at 64 MHz with 256 KB SRAM. $5-8 per chip. Compared to STM32L4: more RAM. Excellent rated.
Espressif risc-v at 160 MHz with 400 KB SRAM. $1-3 per chip. Compared to STM32L4: more RAM, faster clock, cheaper. Excellent rated.
Design IMU-to-inference pipelines visually — from motion sensors to real-time gesture classification on edge devices.
Get Started Free