Hardware Guide

STM32F7 for Fall Detection with TensorFlow Lite Micro

For fall detection, the STM32F7 with TFLite Micro scores Excellent. Its 512 KB internal SRAM (8.0x the required 64 KB) and 216 MHz clock ensure smooth real-time inference on 20 KB models. Hardware DSP extensions boost throughput.

Compatibility: Excellent

With 512 KB of internal SRAM, the STM32F7 provides 8.0x the 64 KB minimum for fall detection. This generous headroom means the 20 KB model tensor arena, sensor input buffers, and application logic (imu polling, Ethernet stack, state management) all fit without contention. The remaining 462 KB after model allocation supports complex application features. The STM32F7 provides 2 MB of flash memory, which comfortably houses the TFLite Micro runtime, the 20 KB model binary, application firmware, and OTA update partitions for field upgrades. Flash usage is well within budget for this configuration. The STM32F7 at 216 MHz with Cortex-M7 instruction and data caches delivers near-real-time inference for mid-size models. Its 512 KB SRAM handles most sensor and audio ML workloads. The ART accelerator reduces flash access latency during inference. For fall detection, connect an IMU sensor (e.g., MPU6050 or LSM6DS3 via I2C/SPI) via SPI to the STM32F7. Sample at 50-200 Hz and collect windows of 64-256 samples as model input. The DSP extensions efficiently compute FFT features from raw sensor data. TFLite Micro's static memory allocation model maps well to the STM32F7's memory architecture — define a fixed tensor arena at compile time with no runtime heap fragmentation risk. The framework's operator coverage supports dense and convolutional layers needed for fall detection. Model conversion uses the standard TFLite converter with int8 post-training quantization. At $8-15 per chip ($25-60 for dev boards), the STM32F7 offers strong value for fall detection deployments. Key STM32F7 features for this workload: Double-precision FPU, L1 cache (16 KB I + 16 KB D), ART Accelerator, Chrom-ART (DMA2D), TFT-LCD controller.

Alternatives

FAQ

How do I update the fall detection model on STM32F7 in production?

Without wireless connectivity, model updates require physical access via USB/JTAG. For field deployments, consider adding a wireless module or using an MCU with built-in connectivity. Always validate model integrity with a checksum before switching to the new version.

What size fall detection model fits on STM32F7?

The STM32F7 has 512 KB SRAM and 2 MB flash. A typical fall detection model is 20 KB after int8 quantization. The tensor arena needs 30-40 KB at runtime. After model allocation, approximately 472 KB remains for application logic, sensor drivers, and Ethernet stack.

Why choose TFLite Micro over other frameworks for STM32F7?

TFLite Micro has the widest operator coverage and largest community for cortex-m7 targets. It supports int8 and float32 models with a static memory allocation model that eliminates heap fragmentation. The STM32F7's 512 KB SRAM works well with TFLite Micro's predictable memory usage. Alternative: Edge Impulse wraps TFLite Micro with a simpler workflow if you prefer cloud-based training.